Questions & Answers for: high pressure spray hose

Ad

Question about Starter Spray Gun Hobby Set

1 Answer

high pressure systems, and may reduce the volume of air and fluids passing through them. If they are used, they should be the largest size available. Hoses: Hoses are used only for delivering air from

Ad

Question about Pressure Washer PSI 3000

1 Answer

...high-pressure hose connects) towards a vacant, safe area. Startup the engine and allow the oil in the garden hose to work its way thru. (About 1 -3 minutes of run-time.) Shut it down and attach the ...

Ad

Question about Pressure Washer PSI 3000

1 Answer

...pump unless you are spraying on low pressure.There is a valve on the inside of inlet hose fitting that closes when high back pressure is sensed.Would it draw bleach into hose when wand tip is

...high pressure flow cuts in and out i have an electric powered karcher 6.91 after i have connected the hose turned the pump on after i have checked the water flow and made sure the filters are clean ...

Question about FHH18A Electric Pressure Washer

1 Answer

...high pressure spray is fine. If your pressure washer works like ours, it has a T connection. A plastic hose comes off the T and goes into the bucket of cleaner Pressure from the hose creates suction ...

Question about 2003 Cavalier

1 Answer

...volume of fluid delivered rather than the high pressure you should get if the restriction of the nozzle were there. It is akin to a the spray of a bare garden hose vs. one with an adjustable

...and spray threw carb cleaner till you have a solid stream out your air breather side of your carb if no solid stream try spraying other direction and using high pressure air hose redip if ...

...high pressure hose has developed a leak. You can spray the hoses and pump down with brake parts cleaner to getting any oil or grease off of these parts. Then you can drive the car for a day or 2 ...

Question about 1500 PSI 1.3 GPM Electric Pressure Washer 51142

1 Answer

...low to clean fence boards. Water faucet is turned to high, motor turns on, but spray does not have full force or pressure. What can I do? Check the hose and nozzle to see if it has any debris in

Question about 1700 PSI, 1.3 GPM Electric Pressure Washer 50 States

1 Answer

water leaks at base of high pressure spray hose. How can I remove the hose? Slip joint pliers work well, check screen when removed. Vise grips may be required to remove hose connection.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1420 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

206 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you an Air Tools & Compressors Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...