Questions & Answers for: high beams wont work 2000

...lights on our 1999 Ford f250 work fine until you try to turn on the brights. The headlights just turn off. Sounds like there is a short in the high beams have you used a volt meter to test for

...high beam light will even show up on bright. The running lights work. Headlights just wont come on. Headlight switch on dash??? Inspect the connection on your high beam switch on the steering

...low beams stopped working. high beam wont stay unless i hold the switch. can i use an old school floor switch for the high beams? I would say your light switch is either dirty or bad. ...

...high beams work but both low don't I have a 91' F250 The high beams work but both low beams don't work the fuse looks ok. There are two separate filaments inside the bulb, one for low and both for ...

...work - high beam OK. Already changed bulb my 2000 f250 did the same thing. i did what you did also. changed bulbs everything else, but had to bring it in to have the wireing harness changed and that ...

High beams dont work. Installed new light. Checked fuses.only low beams. i am not absolutely sure but id check your high beam switch

...a 1999 f250 and the low beams do not come, high beams work fine. They were working I check the two fuses under hood they are fine. Do you have power in and out of the dimmer switch on both circuits

...work on high on 2001 ford f 250 i had the same problem with a 1994 f150 mark III. i replaced the wiper switch and it took care of it.. watch out for your high beam switch. had a problem where my head ...

high beam indicator light not working this is on a 1984 diesel if the high beams are working its possible the high beam indicator on the dash if bad needs replacing.

...High beams are. Checked all fuses and even replaced just to make sure. High beams work fine. Fogs work also. When I pull the bulbs out on low and first put them in the light starts to work then shuts ...