Questions & Answers for: high beam lights work low

Question about 1994 Camry

1 Answer

...been replaced. When high beams are on both lights come on. You may have replaced the high beam by mistake. The low beam is closer to the exterior (the sides of the car) Paul G Schmidt ...

Ad

Question about 1990 Land Cruiser

1 Answer

beam works switch to high beam spot lights work power at all 4 lights but no high beam. high beam indicator light on dash works All 4 lights is HIGH beam. The 2 that come on in 'LOW' are the low beams

Ad

...high beam lights are not 2001 Toyota Corolla both high beam lights are not working suddenly (as of this morning). Low beam lights remain on when switched to high beam. Dash board lights indicate high ...

Question about 1990 Land Cruiser

1 Answer

...low beams do. when the flasher is pulled high beems work. when flicked forward to high beam spot lights come on but stilll no high beams.?? high beam switch is faulty look at getting a new

...high beam. The High beam indicator light also illuminates on the instrument panel when the switch is set on low beam, but the low beams do not light. I checked the dimmer switch for continuity and it ...

Question about 2004 Sienna

1 Answer

...has high/low beam. You should be able to access it from behind the light assembly. You should have a locking device at the headlight assembly and be able to pull the assembly out to make it

Question about 2004 Sienna

1 Answer

My 2004 toyota solara the headlight low beam won't work. The high beam works(on left hand side.. The right side both high and low beams work Any suggestions It sounds like a bad bulb

Question about 1986 K1500

1 Answer

...High Beam Light is DIM? http://technoanswers.blogspot.in/2012/04/2004-dodge-ram-high-beam-light-is-dim.html ---------- 2001 Chevrolet Tahoe: Both Low Beam Lamps Not Working? ...

...high or low beam all other lights work high and low beam do not work Re: Condensation in Sienna Right Headlight.... - Toyota Sienna Forum ...

...high beam only then, my high beam comes on, when release and placed for high beam no lights. Upon doing that I can also see on the dashboard the indicator of the flash high beam and park light. Check ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...