Questions & Answers for: Hyundai XG350 hi scan pro

...Hi-Scan Pro (with Hi-Scan SOL Pro Software Version 09-29-03 or newer) and Data Link Connector (DLC) Cable.SERVICE INFORMATION: The keyless adapter cable can be used on the following vehicles: 2001 - ...

problems with electronic pedal i have a Xlg350 and when you are going to start moving it seems that it jurks right away i thought it was the transmission at first but i believe it can be the ...

05 xg350l airbag for second time stays on i checked under seats nothing there. checked fuses and anything else i could think why does it keep happening? Without knowing what DTC (Diagnostic Trouble ...

check engine light came on You will have to take it to a shop to get scanned, Shops around where i live typically charge $40 - 50 dollars, but from what i hear, Autozone will scan it for free. Once ...

Malfunction indicator light stays on all the time? What are the possible causes. Thanks, Jim which indicator light is on ? the indicator light means something is amiss in the emissions controls, there

the car starts fine but cuts out after it warms up and won't start until it is cold again Sounds like O2 Sensor but if you have a c heck engine light on scan with obd2 scan and retrieve codes and fix ...

malfunction light came on. What should I do? get someone with an obd code reader to scan your car it will detect what is wrong

my xg350 hynudai 2004 wont accept gas What fault codes show up on a scan?

2004 XG350 stalling while driving new battery. No engine light before. All lights went on when stalled. Started right back up get the OBD read for code for faulty sensor/component Sounds like you may ...

relearn procedure if battery was replaced but a scan tool must be hooked up to perform it at dealership I don't understand this question