Questions & Answers for: hh 200

Tandberg LTO HH (LTO-3) I have Installed Tandberg LTO HH (LTO-3) Tape Drive in windows 2003 server.I am planing to use Veritas backup exec 10.0.5484.6 for backup.While installing Veritas backup exec ...

...week 1=sunday, 2=monday....etc.) If won't work, try this From Extension port 00 (usualy station 200) Lift Handset Dial #652 Enter Correct Time HH MM SS Press Redial Replace Handset Regards, Jeep ...

200 Prompt: PASSCODE: Enter 1234 Display shows: DISABLE Press 1 to change to ENABLE Press the Speaker key Enter 505 Current Date/Time shows in the format: WMMDDYY:HHMM W=Week day where 1 = Monday, 2 =

NEED TO CHANG ETHE TIME OF DAY ON PHONE TOSHIBA DKT2010SD Intercom #652 then HH:MM:SS in 24hr format finish by redial. Must be done at ext 200 or 10

do I change the time on the phone On the main phone (ext 200 or 10) dial Intercom #653 and dial in time in HH:MM:SS all are required finish by typing # full guides are here http://guides.idacomusa.com

...# 10, or # 200. 1.-With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply) 2.-Enter the correct time using HH/MM/SS, like 07:24:00 3.-Press ...

...# 10, or # 200. 1.- With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply) 2.- Enter the correct time using HH/MM/SS, like 07:24:00 3.- Press ...

...# 10, or # 200. 1.- With the phone on-hook, dial intercom, #, 652 (depending on the system type, the # may or may not apply) 2.- Enter the correct time using HH/MM/SS, like 07:24:00 3.- Press ...

...200 2.Enter the password 1234 (default password) 3.Press 1 to enable customer programming 4.Press Speaker to access programming 5.Dial 505. 6.Enter new time and date from keypad using format below. ...

...Add a comment and describe problem in more detail Gene ...