plate on the bottom of the throttle body. Last turn on the heater in the car and set the temperature control all the way to the hot side and turn the heater fan on high. Now you are ready to bleed the
...plate or below it and see which best suits your needs.. There is a large hose that goes to the brake power booster from the back of the carb (if power brakes, Another line goes to the vacuum system ...
...heater case cover. Remove core support plate baffle screws. Remove heater core, support plate and baffle from car. Reverse removal proceedure to install. Refill cooling system and check for
plate on the bottom of the throttle body. Last turn on the heater in the car and set the temperature control all the way to the hot side and turn the heater fan on high. Now you are ready to bleed the
Usually answered in minutes!
737 Questions
576 Questions
468 Questions
391 Questions
331 Questions