...fires right up and runs fine. what could be heat sensitive that once the key switch de energizes it the component wont send spark to the plugs it could be an engine heat sensor or water temp
and one after it. You need special socket to remove them. O2 sensor have four wires. Two is for the heater. O2 sensor have heater inside them thats why they are called heated O2 sensors. The other two
...status for my o2 sensor and my catalyst sensor. What more can I do? The not ready may be for a HEATED O2 sensor and HEATED catalyst. Since these cars are not equipped with the HEATED versions, ...
...O2 sensor heats up O2 fast so PCM circuit can go to closed loop faster for emission control. Thats all it does. O2 sensor will still work, just wont heat up quickly to get into closed
...HEAT UP EXHAUST MANIFOLD TO GET O2 SENSOR OUT WITH OUT DAMAGING ITS THREADS HOLES.BESURE SPRAY A LITTLE LIQUID WRENCH OR WD40 TO HELP TO REMOVE O2 SENSOR.YOU HAVE TO GO TO AUTO PARTS STORE AND BUY ...
...1/Sensor 1) (3.3L) Heated Oxygen Sensor (Bank 1/Sensor 2) (3.3L) Heated Oxygen Sensor (Bank 2/Sensor 1) (3.3L) Heated Oxygen Sensor (Bank 2/Sensor 2) (3.3L) ITS BEHIND HEAT SHIELD ON EXHAUST
...heat sensor and I!m smelling a sweet type coolant smell, but very little and its burning twice as much oil as normal.Does not overheat and hardly any white smoke out of tailpipe. the sweet smell is ...
...below the exhaust manifold. EOBD II Error Code: P0134 Description: Oxygen Sensor (O2S) 1, Bank 1/Heated Oxygen Sensor (HO2S) 1, Bank 1 - No Activity Detected Possible Causes: - Wiring. - Signal ...
heat or temp sensors, one for the gauge, and one for the computer. You could also have damaged insulation on the wire leading from the sensor to the gauge. You should be able to ground the wire on the
...oxygen sensor ( O2) are located after the cat converter the one in the exhaust manifold is a heated oxygen sensor (HO2S) and is a totally different operation ...
Usually answered in minutes!
1,045 Questions
774 Questions
337 Questions
287 Questions
