Questions & Answers for: heat cool

cool / heat or a heat pump. If my Carrier model is a 38ckc04830 is it a heat pump without aux heat or is it just straight heat / cool ? if you look inside the condenser unit outside,see if you see the

...heat to cool is the reversing valve. In cooling or heating the Y1 terminal will always be energized, this is the contactor. Depending on brand the reversing valve will either be energized in Heat or ...

...I have: single stage heat and cool; multistage heat and cool; heat pump with backup heat; heat pump without backup heat; heat only; cool only. These are all the options. Thanks. IT'S COOL ONLY

...heat and cool both will operate according to the ambient temperature without having to move the switch from heat to cool. I have a 4-wire heat/cool system. Can the B01 be reconfigured to operate in a ...

pump is switching from cool mode and cool air to heat mode and heat by itself after running cool for a few minutes Check your thermostat setting. It must be minimum 4 degrees difference from room temp

ir400 fan numbers II. FANSA. Arrangement and FunctionsFeeder fanFixing assembly heat dischargefan 1***Fixing assembly heat dischargefan 2 ***Laser driver cooling fanLaser scanner motor cooling fan ...

...heat and cool setpoints are 67 and 70 respectively, and you want 65 and 73. Lower the cooling setpoint to 68 and then raise the cooling setpoint to 73. Now your heating will come on 3 degress lower ...

...cool 3.5 ton 94 afu dual fuel it cools on heat pump heat heats on cooling nest 3 rd gen notgood wiring directions any help 18 seer should have a option in the setting section of tstat that energizes ...

cool. Tested with old thermostat and heat pump heats and cools fine. The reversing orange line is getting the 24 volts with the honeywell but still only heats. Be sure it is wired for heat pump rather