Questions & Answers for: hear wiper motor wipers moving

...wiper motor and is held on by 3 torx screws.Radio Shack has them for $2.75 6A, 50V Rectifier Diodes (4-Pack) Model:276-1661 Ya i have a 2000 mal myself that sounds like the switch because if it was ...

...motor works but the wiper arm does not. I removed the wiper arm cap and found that the bushing that attaches to the motor spindle is cracked. The whole wiper arm assembly will most likely need to be ...

...hear the wiper motor running, the arms are locked up (can't move them manually), and my fuses all seem to be good. I had this problem last year and replaced the wiper motor. Are there other things ...

hear motor running check  the nuts on the wiper arms and make sure they are tight.  If the nuts are tight then a linkage on the wiper transmission probably came loose or broke.  You'

Chevy Malibu 1999 windshield wipers not turning I can hear the motor. The nuts are tight on the outside. I can move the wipers manually. wiper motor stripped maybe a rod off.

...hear motor. No sound at all. Checked again about 3 hours later. Motor is running but wipers are still not moving. -Possibly Lock pin or the bolt that hole the wiper arm to the motor shaft is too lose ...

...hear the motor going; but the arms won't move . Please help sounds like the linkage came unhooked under the hood. Sometimes you can just pop it back on other times if its broke you will have to ...

wiper blades stopped working. Can still hear motor. But blades wont move. While driving blades went erratic on the windshield then stopped Possible wiper linkage has broken/seperated from wiper motor.

2012 chevy Malibu, wipers not working but I can hear motor I guess that's what it is. If you can hear the motor and nothing is happening, the wiper linkage may have failed.

2012 chevy Malibu wipers not working, I think I hear the motor though you need to replace the circuit board it's in the wiper motor, I had the same issue