Questions & Answers for: Chevrolet Camaro where are the heads on a engine

Question about 1983 Camaro

3 Answers

engine has to warm up a little before bubbles appear in the water or it begins to run over, then it will probably be a cracked head, as the crack would have to warm up and expand to allow the water to

Ad

...heads. Engine mounted in 1967 Firebird Engine is made before 86, but I'm not sure when? Regards Sigve, Norway New head gasket gasket needed would be my first guesses. Sounds like vacuum from the ...

Ad

My 97 Chevy Camaro, Is overheating, The Thermostat has been replaced and the radiator has been checked out. I checked the oil and the dip stick came white. Is this a simptom of the Water pump. white ...

Question about 1998 Camaro

1 Answer

...engine wont come up so i can get to the heads. please help! If you are referring to the intake manifold, be very certain that you have removed all of the bolts from the upper and the lower intake ...

heads on a GMC 350 cu in engine.  what is the final torque of the head bolts? For 1985 Chevrolet Camaro 5.0L 4BL OHV 8cyl the Head Bolt Torque 60-70 Foot pounds (Final torque) Torque sequence ---

Question about 1985 Camaro

2 Answers

...engine over with the object in the cylinder. Major damage will occur. You will impact the piston and cylinder head with the object.If you have aluminumn cylinder heads the object will most likely ...

Question about 1985 Camaro

1 Answer

...engine so we can get to the bottom of this? You never said if the heads were resurfaced or not. That copper stuff is a gasket and radiator sealant. It can plug up several tubes in the radiator. Check ...

engine 94 camaro. replaced the heads and gaskets Torque sequence --------- ' 6 2 3 7 ' ' 5 1 4 8 ' --------- Step 1: torque in sequence to 33 Ft/Lbs Step 2: turn an additional 90 degrees Recheck final

Question about 1994 Camaro

1 Answer

moisture showing at the rear of odd numbered valve cover...and milky looking condensation in the valve cover breather...there is no dipstick for this engine...the car doesn't run hotter than 180 ...

...heads. (or pull the engine and do a total rebuild)If you have a failed head gasket and overheat, make sure you find the cause. Otherwise your new heads can easily be damaged again. Check fans for ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...