Questions & Answers for: Chevrolet where are the heads on a engine

engine heads on 5.3 v8 2004 p/u warped Indicates engine overheating. You need to remove the heads, send them to a head shop and let them determine if they can shave them or if you need new heads. Take

...heads. Engine mounted in 1967 Firebird Engine is made before 86, but I'm not sure when? Regards Sigve, Norway New head gasket gasket needed would be my first guesses. Sounds like vacuum from the ...

getting colant in the oil,also loseing it out the exahust sounds like a blown head gasket or a cracked head Likely bad head gasket your head gasket has gone or piston ring is worn have it fixed fast ...

heads on a GMC 350 cu in engine.  what is the final torque of the head bolts? For 1985 Chevrolet Camaro 5.0L 4BL OHV 8cyl the Head Bolt Torque 60-70 Foot pounds (Final torque) Torque sequence ---

...heads. Raise and safely support the vehicle. Drain the engine coolant and the engine oil. Lower the vehicle. Remove the upper and lower intake manifolds. Remove the rocker arms and pushrods. Remove ...

...engine overheat. Aluminum heads will warp if allowed to overheat even for a few minutes. If you check the coolant there may also be oil in the coolant. Remove your spark plugs and see if they are all ...

HEADS NEED SHAVING AT MACHINE SHOP.IF ENGINE GETTING FUEL AND SPARK.YOU HAVE INTAKE VACUUM LEAK AT THE INTAKE MANIFOLD GASKET OR FUEL INJECTORS SEALS LEAKING THEY HAVE TO BE REPLACED IF YOU REMOVE THE

water poured out and water in my oil Water in the oil can only mean a few things: a blown head gasket, intake manifold gasket (on some engines), a cracked/broken cylinder head, or a cracked/broken ...

where's the head gasket located on a 1999 saturn sl 1 The head gasket is in between the cylinder head and the engine block. The sly has a single overhead cam engine. This head is know for being ...

water in oil no water coming out of engine Water in the oil is most likely a head gasket leak-blown head gasket.  You will have to pull the cylinder head off and replace the head gasket.  If