Questions & Answers for: head unit Kitchen Appliances - Others

...head unit wouldn't come on at all. I tried another head unit and it worked fine so I know there is something wrong with the actual head unit itself. I figured it was the fuse on the head but i cant ...

...head unit powers off at high output it could be several things. 1. check ALL your grounds (head unit, amp, etc..) 2. it could be a a short. 3. head unit could be defective disconnect the amp ...

...cde-7872 head unit the speaker leads on this head unit have no sound,,, they are blown, either have them fixed or buy another head unit or the best way is to just use the RCA outputs from the head ...

...head unit and Blaupunkt IDC-A09 changer from my Peugeot car as both had minor faults caused by my son putting objects into cd slots.Prior to this both units worked perfectly in car.After reinstalling ...

...head unit indicates that it is grounded. Is this normal for this wire when the head unit is OFF? However, its still shows ground when head unit is on. Possible bad head unit? Everything else with the ...

...dont work, is it normal? Installer blames the stock head unit. Car stereo If the stock head unit is undersized I agree Check the rating on the head unit if it's a standard head unit it will be too ...

head unit removal proton persona SIMPLE TRIM REMOVAL REQUIRED USING A TRIM REMOVAL TOOL AROUND THE HEAD UNIT TO ACCESS EITHER THE SCREWS HOLDING THE HEAD UNIT IN PLACE (IF BOLT IN HEAD UNIT) OR USE ...

...Head Unit. 2. Kenwood DPX300U Double Din Stereo. 3. Kenwood DDX371 Double Din Head Unit. This are the three most famous stereo brands that you can chose to get the best brand from Pioneer Head Units ...

...head unit with 12 pin for a cd changer, I have connected a kenwood cd changer when I press the cd changer source on my head unit it's coming up aux ext but no changer options It sounds like you're ...

...head unit is different. I do have the pin-out sequences for the Opal head unit. Can I rearrange the pins that plug into the heads unit using its pin-out list. It is generally not recommended to ...