Questions & Answers for: Saab 9000 head unit

...unit is internal and is oil fed by engine oil pump. Sometimes it can be remedied by replacing engine oil and filter, try 15x40 oil (for warm weather) or 5w30 (Cold climates) Check to see if water in ...

Head lights turn off when the car has been driven for about an ho While driving the car for around an hour the head lights turn off for no reason. The Emergency flashers stop working. The High beams ...

Where is the thermostat located on a 1993 Saab.? Follow the driver side radiator hose to the head. The thermostat is located under the casting that the hose attaches to.

...head unit put in by a audio shop and when i got my car (1993 Saab 9000 CSE Turbo) back my rear speakers dint work so i took the head unit out(because the shop would not fix it or refund me and i cant ...

1993 saab turbo CSE. limphome mode, possible head gasket leak 1993 saab turbo CSE. I have a rebuilt engine and I see what appears to be oil leaking out of the engine apparently from the gasket (very ...

i had a coolant loss problem, we replaced the head gasket, had the head pressure tested, put everything together and we still have a coolant loss, could it be the turbo which is water and oil cooled? ...

...should not have to replace the block. In fact if my memory is in tact the tensor pulley is on the head and not the block. Therefore, at most you would need to replace the head. Either way please

I need torque specifications for a 93 Saab 9000 engine: Head bolts and also for the connecting rods Thank You JLM YOU NEED TO MAKE 3 PASS FIRST PAST TORQUE CYLINDER BOLTS 44 FT LBS. SECOND PASS TORQUE

1997 Saab 9000 won't start after head gasket replacement I have a 1997 Saab 9000, I replaced the head gasket and retorqued all the bolts and hooked all the hoses back on correctly. When I try to ...

...as coolant continues to decrease, eventually the engine begins to overheat. I suspect a blown head gasket. Is there any agreement with this diagnosis, given the symptoms, and/or what else could ...