Questions & Answers for: Ford Mustang head rest

...head gasket finally blew the rest of the way going down the highway If you had smoke pouring out the exhaust, you blew the head gaskets. Make sure you get heads cleaned and checked. When I blew mine ...

the headrest bar and the opening where it goes in the seat. (back side of head rest) and pull up. It should come right out. I used a paint stir stick when I changed my seat belt loops. Hope this helps

how do the head rest release on 02 mustang for installing seat covers. after hitting stop it seems it cant be removed. paper clip in a little hole on the master or slave where the h/r pins go into

...head rest bar (the side facing the rear of the vechicle) I used a thin paint stirring stick, a Slim Jim is ideal. Once the stick is inserted (10" give or take) push the head rest down holding the ...

...head rest is a little hole on the inside between the 2 bars. You need to push a paper clip or something like that in the hole to release the stop and keep pushing as you lift. Once that is done then ...

...rest of the ride home(1 mile) Parked car in drive with the car still running.Looked to see right rear tail light flashing(only one bulb was flashing) no interior lights no head lights and no radio or ...

head screw driver to push clip off,door handle has to come off,arm rest if you have one,,there are clips holding the panel to door,you can also use a flat head to put in between panel and door and pop

head rest in a 1998 mustang cant find no button loosen up the cover to the seat and reach into the actual seat from underneath, there should be 2 latches. The closest one at the bottom of the headrest

how to remove a head rest in a 1998 mustang gt Single bar head rest or 2 post headrest either design should have a release mechanism at collar or bezel on seat.

head rest Hi Larry: If the head rest is height adjustable, sometimes all you need to do is SHARPLY pull it upwards and it will slide right out. I just went through this with several different vehicles