Questions & Answers for: Acura Integra hatchback lock

Question about 1992 Integra Hatchback

3 Answers

key stuck in ignition, when cold it is paaark I finally just had this fixed, after dealing with it the past year or so (1992 Integra). They replaced the shifter switch (parts and labor cost me $150), ...

Ad

Question about 1992 Integra Hatchback

1 Answer

abs light stays on the abs light on my 92 integra stays on. is there a problem with my brakes? your brakes are fine it's just telling you that the abs is no longer on . This means if you have a panic ...

Ad

Question about 1992 Integra Hatchback

2 Answers

the ABS light is on mt 1992 acura integra Your ABS (anti-lock brake system)has to do with your brakes. Check your brake fluid to make sure it's a the maximum level if so you may need new brakes. Hope ...

Question about 1992 Integra Hatchback

1 Answer

i lost the key to my 92 acura integra..i need to go to work tomorrow and i cant start the car with no key?? anyn ideas on how to get it started with no key? Well you can start it without the key, but ...

Question about 1991 Integra Hatchback

1 Answer

1991 Integra - key won't budge in ignition. Gear shift is in park but has been tempermental about recognizing Park. Can't get the key or the gear shift to budge. Any suggestions? is the steering wheel

hatchback locks up and won't open with remote or key. Doesn't do it all the time, she'll go to the store, come out and put something in the back of the car, close it and drive home, she'll try to open

Question about 1991 Integra Hatchback

1 Answer

How do I fix the door/lock of my 1991 Acura Integra? I can only open the driver side door from the outside There are only 2 places that you have the problem on the inside door handle. one is at the ...

how do i lock my car in park with the shift lock key slot next to the gears i have a 97 integra ls if it has a cover remove and stick key in hole

92 integra cranks but wont start after changing fuel filter i changed my fuel filter and my car wont start. is there a air lock or something that couldve happened? If this is an inline filter with the

1991 Acura integra, screw that holds the rotor cap repeatedly backs out, even with lock-tite replace the distributor. Hate to say it, but there's really nothing else you can do. Lock-tight don't work?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...