Questions & Answers for: Pontiac Aztek hatch won t open

HATCH BACK WON'T OPEN HATCH BACK IS LOCKED AND WON'T OPEN WITH KEY OR POWER LOCK (RELEASE BUTTON). CHECKED FUSE AND ITS OK. You may want to just remove fuze #28 under the hood...for about 30 seconds..

...hatch will open. you can then use a screwdriver to reach down through the internal part of the latch and release it so you can access the bolts to disasemble the hatch to get to the solonoid motors. ...

...open the rear hatch. Thanks for using FixYa and welcome to the site. There is usually a cable that connects from the button to the latch. It may be broke. You may be able to get another key made at a ...

hatch with the ignition key and won't open. I even tried the clicker and still does not work. Then the next day the dashboard lights flashed, i.e., battery life, seat belt light and service light came

...hatch keeps clicking as to open. what should we try Hi, Try to check the electric relay for the A/C system and clean the relay terminals! By using the same type of relay/ buy a new one, try to ...

...open the reare hatch.what is the best remody for this? HIt the unlatch button twice, sometimes three times.  As it was explained to meit has to be tight in the winter so it doesn't fly up in ...

...won't release/open the latches when pulled. Is there an electrical override/lock that can keep the latches locked? If so, How ca If there is an electrical control circuit that keeps rear tailgate ...

...hatch wont open remote, inside button release and latch do not open the hatch Body Control should be changed but a quick fix is too disconnect the battery and than rehook the battery -- seem to work ...

the uper hatch opens but lower tail gate wont i tryed hitting the swtich more than once no go top opens but telgate wont no matter what i try If you have the touch pad on the hatch, replace it. If you

down and open the hatch. After it is open, remove the screws at the handle on the bottom and finish popping it off. Replace the plastic tab that has broken for the rod. I suggest replacing all of them