...hard. Or the choke is closing/sticking and causing same. Also look at the heat shield that goes between the starter and the exhaust. It may be gone and when the starter gets hot it wont work as
...Check for operation of purge, PVC, and EGR valves, that can effect mixture and make starting hard. look for holes in the air intake tubes to the air filter, the idle air control valve is also ...
hard and won't work. It did work but when it got hot would not start so i took it apart to check the brushes and they don't look bad. What do ya think? The armThe armature has swelled up from age. You
but won't hard starting on hot engines is caused by just 2 things: 1. carbons in starter needs to be replaced. 2. ignition timing is overly advanced. timing should be recalibrated by your mechanic
Question about 1989 Bronco
...hot and is hard to start you should look at the heat shield between the exhaust and the starter. a hot starter = hard to start. ALSO if your timing is advanced it will cause it to be hard to start. ...
Usually answered in minutes!
227 Questions
224 Questions
178 Questions
137 Questions
124 Questions