Questions & Answers for: Yamaha FJR 1300 hard to start when hot

engine noise Yamaha FJR 1300 2005, rattling sound at idle, goes away with very hot engine temps. The sound started very small maybe a tap here and there at idle. Now its very noticeable. I checked ...

Ad

engine temp guage runs half way while riding I have had the sender unit changed twice and the guage still runs at half way while riding, im told this is ok, but sometimes it runs on 4 bars just over 1

Ad

Question about 2003 FJR 1300

1 Answer

...I bought a used 2003 FJR 1300. My problem is when I shift into 1st from n it shifts really hard and grinds gears and the bike moves just a little. It is like the clutch is not disengaging. ...

If I Stall My Yam FJR I Now Have To Go Into Neutral Before it will start this is the best way of starting your bike yes not the only, pull your clutch in and you can start it as will, if not your ...

...below. Good luck and have a wonderful day. Hard to start when hot Hard to start when hot Technical Mechanical Problems Yamaha FJR1300R Service Manual OEM parts for Yamaha Yamaha FJR1300R Owner ...

Question about 2005 FJR 1300

1 Answer

we left the keys on the bike over night and now the bike won't turn-on, we try charging the battery First you need to find out if the battery has any life in it at all. Leaving the key turned on ...

Question about 2005 FJR 1300

1 Answer

engine management light came on for a few miles only - then suddenly went out and has not reoccured, should i continue use and wait for reoccur and an error code to identify?? the bike is fjr1300 year

...start-ups. What you want to avoid is the "friction modifiers & energy conserving" labels. These have been known to effect clutch performance. Yamalube 20w40 is recommended for your bike. That ...

motorcycle runs great never had any issues, but the battery was 4+ years old . One morning I tried to start it and the battery was very weak tried to start several times would not start , brought new ...

Why does my yamaha fjr 1300 left hand disc get too hot and goes blue? Hi, Sue, this issue is usually caused by a contaminated caliper that is not allowing the piston to retract completely allowing the

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...