Questions & Answers for: Toyota 4Runner hard start when cold

Ad

Question about 1991 4Runner

1 Answer

...hard start So I have replaced fuel filter, spark plugs, plug wires, checked vaccum lines, fuel pressure regulator, oil change. The thing is its still having a hard time starting in the morning (its ...

Ad

hard to start in morning, changed out cold start solinoid, no change,my truck is 86 toyota 4-runner w/22re engine Buy a high amperage cold cranking battery! Typically there used in diesel engines, ...

Ad

...hard starts sounds like the fuel pump ...yes starting fluid will start the vehicle but consider it will damage your components and you risk many internal issues especially with today's electrical ...

Question about 1993 4Runner

1 Answer

it's. hard to start when its cold It take awhile. To start when its cold? have you checked your starter . sumtimes it gets so cold that it wont turn sumtimes till its warm enuff that all it prolly is

Question about 1993 4Runner

1 Answer

...hard to start when outside temp drops below 30 d, it cranks fine. Starts and runs very well after that. check the cold start injector, on the side of the plenem. there is also a cold start timing ...

Question about 1990 4Runner

1 Answer

...hard time starting. I keeping cranking it till it starts which takes about at least a minute to two minutes. when the engine is warm, it starts back up with ease. only when the engine is cold this ...

...hard to start when cold It will start after cranking for about 10 minutes, but when it warms up it starts right off. Have you checked fuel pressure before and after the first attempt to start ? It ...

hard cold start , coolant temp replaced , start injecter rigged with remote switch , it still floodes out If you disconnect the wiring for the injector and it still floods, the injector is usually ...

Question about 1994 4Runner

1 Answer

...hard-start after 3-4 hrs......All the above are good possibilities and should be checked.....I don't know what changing to E3 means exactly, but if it means changing the spark-plugs, it could be that ...

...v6 located it is hard to start after it has sat overnight but once you get it started just hit the key and go run the fault codes to find out why the ambient temp sensor is not working

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...