Questions & Answers for: hard push wheelchair

...or maybe the wheel bearings are dry. Does the scooter push hard when in free-wheel mode? You may also need to have your charger checked, to be sure your batteries are really being fully

Hard to PUSH I HAVE A QUICKIE 2 MANUAL WHEELCHAIR AND IT SEEMS REALLY HARD TO PUSH THESE DAYS LIKE THE TIRES ARE LOW BUT THERE NOT, ANY SUGGESTION WHY IT IS SO HARD TO PUSH Pull off the Big Wheels and

...cord or supply cord that goes from the joy stick to the battery? of course, that's how the joystick communicates to the wheels....they wear out very easily if you push the joystick too

...It has a lock lever on the side. Push the lever and turn the seat slightly while lifting up with both hands. Sometimes, they need a pretty hard **** to get it to release, but it will come right

...all lights go on but it hesitates and then the lights go off except for the red ones and the chair hardly moves. Hi! It may just be a battery problem. Battery fails due to long time use and I

wheelchair. The power level is controlled by a potentiometer or rheostat. Everything works fine when the potentiometer is turned no more than half way up. But when I turn the potentiometer more than 1

...when going over mud , you need to turn down the speed pot and don't push forward so hard on the joystick, it's tricky but can be done ...Hope that helps... Regards Rob ...

My invacare pronto m41 is very hard to turn on and off. Do I need to replace the keypad or the joystick? The back of the keypad has a flexible metallic coating that comes in contact with a ...

...hard time trying to push the scooter. Turn it on and try to drive if the meter goes to above the middle on the meter, it should ok, but, if the needle goes to red right away time for new batteries. ...

a test restart the chair. make sure both freewheel levers are locked in drive mode (hard to push), restart, make sure your connections are good, to the motors and brakes. what kind of Joystick is this