Questions & Answers for: handwheel hard turn

Question about 1008

2 Answers

...any detectable end play. 2. Is the handwheel hard to turn other than the intermittent binding due to the handwheel wobble? Get back to me, and I'll guide you through some other diagnostics. ...

Ad

...handwheel feels really tight and hard to move. I cleaned it all, oiled the spots as per the manual and then rethreaded it- it started back up but then stopped again. Any help you could give me would ...

Ad

Question about Superlock 2000 ATS Mechanical Sewing Machine

2 Answers

...HANDWHEEL WAS HARD TO TURN AND MACHINE WONT RUN WHEN PLUGGED IN. I OPENED THE SIDE COVER WHERE HANDWHEEL IS LOCATED. FOUND THE BELT WAS DRIVEN OFF THE MOTOR. PUT ON THE BELT ON THE MOTOR, OILED THE ...

Question about Artista 180

1 Answer

...wheel is hard to turn If the handwheel on your Bernina 707 is hard to turn, it most likely needs a good cleaning and oiling. Old oil dries and tends to get gummy, causing the moving parts to be

Question about Shark 80 - 7133

1 Answer

handwheel is extremely hard to turn. I've already removed plate and cleaned out threads and stuff but that didn't help. I've also removed bobbin holder from inside. Thank you. If its that hard to turn

Question about Shark 80 - 7133

1 Answer

...handwheel hard to turn? If so I would start with a good oiling. Take the top and bottom off and oil all metal on metal with some clear thin oil. May need to work that handwheel back and forth when ...

...hard to get off). Clean inside the handwheel and the machine main shaft. Lubricate the Main shaft and put handwheel back on. When you put the small 3 prong part back on it needs to have the prongs ...

Question about Shark 80 - 7133

1 Answer

...day. Next day, pressing on foot pedal the machine sounds likes it's working very hard and won't sew. Smells too warm. Handwheel turns extremely hard. it would be a good idea to have the serger ...

...handwheel on the Rex mini is not bringing the needle up.. It won't move https://www.youtube.com/watch?v=DduKnA7arfA If your hand wheel is hard to turn do not force the hand wheel to turn. ... Remove ...

...straight stitch machine. The motor is separate. Turn the handwheel hard by hand. Then it needs re-timing. https://www.allbrands.com/products/4031-yamata-fy8500-gc8500-high-speed-straight-lockstitc

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6688 Answers

Brad Brown

Level 3 Expert

19187 Answers

SmartAviator
SmartAviator

Level 3 Expert

1124 Answers

Are you a Sewing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...