Questions & Answers for: gun shot head

...shot because you always aim for the head when hunting turkeys.Good luck with the Mossberg.I traded mine for a Remington.Still got a Mossy for a "loaner" or a backup gun for a client.The 3.5 magnums ...

Ad

Question about PasLode 900420 Impulse Framing Nailer

1 Answer

gun half apart to open. I have 2 guns doing this. I have several of these guns and never had this problem before. Hi, Sounds like your accuator is shot. That`s around $12. You can buy the pin with the

Ad

Question about FP620 Framepro 602 2" - 3 - 1/2" Full Round Head Nailer

1 Answer

...gun during shot is indication of worn/cracked lower bumper. Remove head and pull piston; examine bumper and replace as needed. Air leaking thru nose when airline is connected is indication of leaking ...

Question about Bostitch Coil Framing Nailer

1 Answer

head and the gun works fine except after the nail is shot the gun leaks air for a second before it seals off. I can't remember the gun doing this before. Is there a problem? Check the orings for leaks

Question about US Special Forces: Team Factor

2 Answers

...you're about to shoot, but instead aim for the upper chest or neck. That way when you shoot you cause serious injury to the other player as your gun's recoil finishes him off with a head shot. ...

Question about NR83AA3 3 1/4" Clipped Head Framing Nailer

1 Answer

...shot. It has been working fine for the last several days. I've got it running on between 75 and 80 psi. Place two drops of light oil into the gun at the air inlet, and re-connect the hose. Fire ...

Question about D51321 3/4" 1 3/4" Heavy Duty Coil Roofing Nailer, 70 120 Psi

1 Answer

shot nails When the driver or headvalve is stuck in place and the gun is fired, there will be a pop sound or the sound of air being released within the gun and at the trigger. Remove the nails and air

Question about NR90AE Full Round Head Framing Nailer

1 Answer

gun then depressing trigger will usually cause double fire in the hands of new user.  New user should practice on scrap lumber  bump firing at many angles till they get the idea; &

...gun. The only thing I can think of his to replace the trigger control valve. Any thoughts on this? Most all of my guns are senco and the head has the moving part for fire and reload,, controlling the ...

Question about Clipped Head Framing Nailer

1 Answer

does the dewalt D51825 shoot round head nails i was just wondering if the gun shot both clipped and full round head nails No, It uses Clipped head nails.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Optics Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66838 Answers

Tony Parsons
Tony Parsons

Level 3 Expert

6405 Answers

Are you an Optics Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...