Questions & Answers for: guitar input audio

...guitar comes through both headphones absolutely fine, how can i fix this? Thanks. The Fastrack only has one audio input signal to the PC. You'll need to set your recording software to mono, then you ...

...Audio Fast Track guitar/mic recording interface, but Audacity doesn't recognize the sound card. I've chosen the recording device to be Fast Track but still no recognition. Thanks for your help! First ...

...AUDIO FAST TRACK ULTRA. I PLUG IN A GUITAR AND DON'T HERE SOUND OUT OF MY SPEAKERS. I GET IN COMING SIGNAL AND CAN RECORD AND PLAYBACK WHAT WAS RECORDED. WHEN I PLAY BACK THE RECORDING I HERE THE ...

...input,repeats from dd3 are clean but when guitar is cranked repeats are unpleasantly distorted.How can I cure this? You are probably overdriving the pedal. Reduce the amplitude INTO the pedal and ...

...My guitar is connected to the mixer which in turn is connected to m audio fast track ultra and to an amplifier and speakers. I cant hear any sound plug guitar into fast track, to mixer, to ...

...guitar cord into the M-Audio FastTrack and im not getting any signal into protools at all. It's not picking up the guitar sound at all. Make sure you inputs and outputs are configured correctly in ...

...into the boss rv3 which jacks Plug your guitar into the input and a cord from one or both outputs to the inputs of whatever you are using. Meant to be run in stereo for best sound. Two guitar

...and mini amp so i can use the multi-fx processor. can you help? Connect the guitar out to the FX input and connect the output jack of the FX to the Amp input.You will need two guitar cables for

I can record voice, but not guitar. I see the signal for the guitar, but just not recording. I following the same directions I would for voice but does not work. Any suggestions? Thanks There is a ...

...guitar on the right. So I would like to use Protools SE so if someone has a solution i would be very grateful. In Protools go into hardware setup and make sure that your interface is being read ...