Questions & Answers for: Lutron grounds

continuous ground wire problem How do I thread/wind the ground wire if it is continuous and connects to two switches? Can't wind the ground wire around anything using the area provided...thanks What ...

no ground wire on the dimmer switch what do I do with the ground wire coming from the box Place it under the mounting plate where the 2 mounting screws mount to the wall box.

have lg-600p with 2 black wires and 1 green. do i wire the 2 black to the black circuit wires and the green to the negative? Simply, no...but it's almost never simple is it? In household wiring (AC) ...

First, I have power running thru a switch box. All white commons are tied together. Then I tap power to S1 switch leg with light working normal using a standard S1 switch. Then using a Lutron DV-600P ...

i AM REPLACING A LUTRON DIMMER SWITCH AND HAVE i THINK MADE ALL THE RIGHT CI=CONNECTIONS - COULD A FAULTY GROUNDING BE THE PROBLEM? As a general rule, grounding will not affect operation of dimmer. ...

I have two black wires in box attached to regular light switch & want to know if I can install a Skylark S-603PG single pole dimmer switch which has one black , one red&white, red and green ...

REPLACEMENT OF PRIOR DIMMER The dimmer I'm replacing hS NO GROUNDING (GREEN) WIRE. WHAT DO I DO WITH THE GREEN WIRE THAT COMES WITH THE NEW DIMMER? All ground wires should be connected ...

i have s2-lfsqh-wh 300w 1.5a can this be wired as a 3 way if so how I have installed this type switch many times, never as a three way. Installed new ceiling fan, ran separate line for fan and light, ...

may i use a ground wire instead of neutral On single-phase wiring systems, the neutral and ground wires are connected to the same bus bar in the circuit breaker panel (thus they are the same potential

Can I just cut the black wires coming out of old switch and connect with wire nuts to black wires of new switch? And cap off the ground wire from new switch since no ground on old switch? Replacing ...