Questions & Answers for: Lutron ground

continuous ground wire problem How do I thread/wind the ground wire if it is continuous and connects to two switches? Can't wind the ground wire around anything using the area provided...thanks What ...

no ground wire on the dimmer switch what do I do with the ground wire coming from the box Place it under the mounting plate where the 2 mounting screws mount to the wall box.

it? In household wiring (AC) there is really no positive and negative, they are hot and neutral and ground. Wire black to black, yes. But the green one is the ground and if you wire this one wrong you

First, I have power running thru a switch box. All white commons are tied together. Then I tap power to S1 switch leg with light working normal using a standard S1 switch. Then using a Lutron DV-600P ...

i AM REPLACING A LUTRON DIMMER SWITCH AND HAVE i THINK MADE ALL THE RIGHT CI=CONNECTIONS - COULD A FAULTY GROUNDING BE THE PROBLEM? As a general rule, grounding will not affect operation of dimmer. ...

...Twist a wire nut over this wire for a single-pole application. 2) Green wire connects to bare ground wire. Or bare ground to bare ground. 3) Connect dimmer-red and dimmer-black to either ...

REPLACEMENT OF PRIOR DIMMER The dimmer I'm replacing hS NO GROUNDING (GREEN) WIRE. WHAT DO I DO WITH THE GREEN WIRE THAT COMES WITH THE NEW DIMMER? All ground wires should be connected ...

...switch which had nothing going to. I ran black power supply to base supply, yellow to fan black, ground to ground, tied commons together, cant get it to work. I doubt it. They are designed for a 3 ...

may i use a ground wire instead of neutral On single-phase wiring systems, the neutral and ground wires are connected to the same bus bar in the circuit breaker panel (thus they are the same potential

...coming out of old switch and connect with wire nuts to black wires of new switch? And cap off the ground wire from new switch since no ground on old switch? Replacing Thyrocon SDP600 single pole ...