Questions & Answers for: Harley Davidson FXDBI Street Bob grips

have taken clutch apart and refitted, but is now slipping any help really aopopreciated thank you hopefully you soaked your clutch plates in oil before installing them! If so adjustment is performed ...

i installed new grips on my 2006 dyna wide glide and now the speedo and turn signals don't work Sounds like you pulled some wires out . Double check your wires in the handle bar area .

BOUGHT NEW GRIPS FOR 2010 FAT BOB IS THAT SOMETHING I can do myself or is the throttle side gonna be a problem? Throttle side switch housing may need taken apart. Just take your time and read the ...

i need step by step instructions on how to change a brake lever on a 2006 street bob Unless they've changed something that I'm not aware of, the brake lever is not difficult to change out. Since the ...

inside slider tube on 2007 49 mm showa front forks there is a teflon looking bushing or stop, I can not see how to remove it, want to do a performance coating on slider an it will be subjected to 350 ...

Changing grips. Any suggestions or warnings, expecially on the throttle side? 2006 HD Dyna Street Bob Usually when you change the grips on the throttle side, depending on what type of replacement ...

2000 Sportster 883, the throttle grip does not work. It turns in clockwise position but does not engage engine. I don't really understand what you're saying. You say your throttle grip turns in the ...

Clutch cable adjustment maxed out , with plenty of slack, appears to be pulled lose internally, What could be going on here ? sounds like you 1st need to reajust your clutch remove the derby cover and