How do you change spark plugs in a 2002 Sierra 6.0l. How do you take the spark plug heat shield and spark plug boot? Well the wire and boot may come off together or seperate.I have never had any luck ...
the housing of my brakes on the handle bars is loose and keeps moving. how do i tighten it so that it stops moving when i apply pressure on it and/or squeeze the brake lever?? If the screw is all the ...
can't get oil filter off, can i put vice grip on inside stem? hi use a chain grip on the outer case and make sure you remove the old rubber seal ring and replace it with the new one good luck
...the top of the pin to get it started. Then as the head becomes visible, you can lock a pair of vice grips on the pin and tap it out. Sometimes a pry bar is enough to finish the job. There may be a ...
ive rounded the star bolt of front caliper how will i get it off (picasso) get some vise grips [real vise grip brand vise grips] and remove the bolt. the other brand vise grips in my experience wont ...
the square plug in the rearend is rounded out so how can i get the plug out Use an easy out. Almost looks like a torque bit but has more grip and gets tighter as you go to loosen.
...an inoperative latch If the cable broke in the cab you can grip the remains with a pair of vice grips and give it a yank. If the cable is intact then have someone push down on the hood while you ...
i painted my running boards,looking for something to put on them for slippery 2007 yukon xl denali You can buy strips or rolls of safety grip tape at Lowe's hardware store that works great and looks ...
loosening the nut between the fan and pully; to replace the water pump.can't seem to get a good grip on pully to turn the large nut. a strap wrench should do the trick. there not that expensive.
...stuck on. Is there another way to release my emergency brake. grip the end of the cable with vice grips and give it a
Usually answered in minutes!
2,225 Questions
1,363 Questions
1,368 Questions
1,418 Questions
1,123 Questions
