Questions & Answers for: Sony green led

...light output is not at the same level as the remaining orginal LED. The original green LED looks like a high output white LED that was covered with a thin green coat. Not sure where you can get

...LED blinks green a few times, then I hear a click from the back, and then Power LED starts blinking red 4 times then brief pause then 3 times. The 4+3 red LED blinking pattern continues. If I press ...

led stays lit green, then the pictures goes black, no sound and the green power/standby led blinks? I had this same problem and after doing some research, I removed the lamp, cleaned it and plugged it

...green LED lights up but the screen remain blank .. after a few seconds, two green LED switch off and the red LED diagnostic blinks 3 times... then 4 times ... then continue blinking 4 times. Hi, this ...

...led is blinking green after turn solid green on the image its ok but after less than minute turn off the screen but the led still solid green IF YOU HAVE ALREADY TRIED REPLACING THE LAMP YOU NEED TO ...

...Green power LED is flashing continuously.. no I have a SONY KDS-60A2000 SXRD TV. My Green POWER LED is flashing continuously.. no picture, good sound. Any idea what the problem is? Note, this is not ...

green light just keeps blinking cuando le dan a prender prende el led verde y la tv prende prende por 3 segundo presenta en la pantalla el letrero sony y se apaga la tv y el led verde. luego prende el

...led is on, and on top the three green leds stayed lighted with no display on the screen. the 3 green leds are indicators for numlock, capslock & scroll lock. You were FORMATTING it? Meaning... you ...

...green led and orange led blink continuously. Will not enter service mode. Reset did not help either. Is the LCD screen dead? Is this the TCON board? Seems that way. Fact that you saw the logo on ...

...led green light is blinking continusely while tv is working A green LED that blinks On and Off is an indication on some models that the TV is receiving commands from the remote controller. Try ...