Question about 2004 Maxima
...ON THE CAM RIGHT SIDE OF THE ENGINE, THE EASIEST WAY TO IDENTIFY THEM IS THAT THEIR CONNECTOR IS GREEN, ONCE YOU LOCATE THEM THE CLIP NEEDS TO BE PUSHED DOWN TOWARD THE SENSOR FOR THE CONNECTOR TO ...
...LED and green LED perform different functions in different modes. Mode I- This is the normal vehicle operating mode. The green LED will indicate loop status. If the green LED is not blinking when the ...
...green LED's on top of the ECU will blink simultaneously. One time, pause, then 2 times, three times, pause...so on for each mode, 1 through 5. Mode 3 is the most commonly used mode and will yield the ...
...green LED lights on the side of the computer next to the mode selector. They will flash to indicate the modes, with a pause between each mode. One quick flash is mode one, two quick flashes is mode ...
...green LED lights and the diagnostic switch (on/off), can tell you if problems are present in the system or not. You just have to follow the diagnostic procedure. Here's how: Make sure diagnostic ...
...green led lights on the ecu? These are for the "limited diagnostic functions". Were you to go through the diagnostic systems check, the led lights would tell you first if the oxygen sensor is sending ...
Usually answered in minutes!
1,587 Questions
1,450 Questions
1,309 Questions
1,122 Questions
1,306 Questions
