...green LED next to the phase and crossover knob is not lit any more...I am assuming that the sub is dead, is there any other way to tell if is powered on?? Would it be cheaper to have it repaired or ...
...green LED between the phase switch and the crossover knob appears to be out..Is the sub dead? Is it cheaper to have the amp replaced on it or just go buy a new one?? I had the same problem. When I ...
...LED and a green servo LED. The red LED should be on when power is applied. The green servo LED should only come on during high-level bass transients. Turn the gain down slightly if it stays on for ...
Question about BASSLINK Car Subwoofer
...green servo LED is now on all the time as well. I have checked all the connections and they all seem to be strong, including the positive, and ground. On the head unit I made sure that the subwoofer ...
...switch on the BU series; it's in standby mode whenever it's plugged in. When playing music normal LED color should be green. After no signal for 10 minutes or so it will turn back to Red
Question about Bass Link Subwoofer Car Audio Amplifier
...LED glows green when the servo circuit has determined that the woofer has reached maximum excursion and power to the woofer has been modified to provide maximum performance. The LED should light ...
Question about Entra Sub Subwoofer
...green led is on so it is getting power need pinpoint tests to check internal components Best to start at the beginning. You have it connected properly? Are you using the line level, direct or speaker ...
Usually answered in minutes!
26 Questions
27 Questions
23 Questions
22 Questions
7 Questions