Questions & Answers for: grand cherokee 4 timing belt

...Grand Cherokee : Replaced Water Pump and Drive Belt now Jeep won't start? Jeep is turning over but not firing not sure what's wrong. When the Jeep overheated it won't start after wards. Now we have ...

Ad

...Grand Cherokee this morning and the serpentine belt came off. I installed a new belt and it came off immediately when the engine started. I took a closer look and discovered the crankshaft pulley was ...

Ad

...Grand Cherokee seat belt noise and light. When I start my 95 Jeep Grand Cherokee Limited the seat belt light comes on as usual and chimes 6 times. Normally once I put my seat belt on, the light goes ...

cherokee 4wd 6cyl. replaced drive belt awhile back now having problems. while driving it spits/sputters dies out & catches back up.Has back fired with flames out of exhaust.will also cut out/. pcm has

Question about 1998 Grand Cherokee

1 Answer

...Grand Cherokee with about 175,000 miles on it. I think it is in great condition. Recently (well probably over the course of time) the AC Compressor has been wearing out and the bearings are becoming ...

4 times coasted and then cut off. It turns over but it won't start Fuel pump Crank Position Sensor Loose ground Distributor parts,bad or broken Need to check for fuel pressure,spark etc.Can't guess at

Question about 1994 Grand Cherokee

1 Answer

...grand cherokee limited edition with a 4.0 liter straight 6, it has a loud squeeling noise. I have replaced the following , Altinator, both idler pullys, disconnectedthe ac pump and put a shorter belt ...

Grand Cherokee Limited steering wheel is stiff and car is overheating I was driving my 1997 Jeep Grand Cherokee and at a stop light I heard a snapping noise and the car began to shake a little. I kept

Question about 1996 Grand Cherokee

2 Answers

...grand cherokee keeps acting like losing power, backfires and randomly shuts off and now it wont start again...any suggestions?? timing belt may have slipped. usually if the engine starts to back fire ...

4.7L so tension of what belt.. the FAN belt. is my guess. my guess is you dont know that some engines have a tensioner device and others its dont by the accessory device, settings. since you gave year

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...