Questions & Answers for: govener

transmission my c4 1984 only runs in 1. gear. does anyone know what the problem might be. Pe. govener gear is worn and has broken teeth on drivers side of tranny pop cover off its a circle shape on ...

how to take a govener off on a 2003 ford explorer Govener can be bypased with the purchace of an aftermarket Tuner, Edge makes one that works well,

can the govener be removed from the engine how can the govener be removed For most newer vehicles, it is programmed into the ECU (computer). Look into a performance chip or Apexi controller to unlock ...

...get it to start/run check the carborator see if the butterfly valves or closed, than see if the govener can move back and forth and than go farther and if you move the throttle will the govener ...

...else could be wrong? 3 speed auto or 4 speed auto? Does the speedometer work? the problem is 125 govener uses a check ball type govener the balls become stuck in the govener-also look at the pan ...

Govener over reves engine for no reason. Tecumseh 8HP Model TVM195 150220F On a Snapper riding mower Model 3080S. Just replaced the carburetor P/N632991. Engine will idle if I push in the govener ...

have 17hp kawasaki engined husky when not under load engine govener seems to make engine run badly almost like a rotary engine buy a new govener

My engine will not stay running until it gets warm, then it runs normal. Could this be a govener problem checked spark and rebuidt carb. Check for blown head gasket or leak at block to carb .Check ...

Toyota 91 mr2 do it have goven Do a 1991 mr2 have govener on it I believe that it is not governed, but if it really is you can take it to a tuning garage and get it removed.

wont run at slow speed. either full on or full off don't think its anything to do with the govener but I am curious why when I disconnect the govener completely it still runs the same what engine ...