GMC Canyon 2.8L 4 cyl. 5 speed. has a starting problem that happens about twice/week. the engine would crank but will not turn over. After the 12th or 13th try of cranking it over it finaly fires over
...GMC canyon will not start from time to time. This doesnt happen all the time but twice we have attempted to start our canyon and it will not start. The motor turns, but will not start. All lights and ...
gmc canyon, 5 cyl check engine light is on. Advanced says OBDII shows codes for Large Evap leak and random misfire in cylinders. i have replaced the fuel cap. i went off and is back on again. Observed
...GMC Canyon (Chevy Colorado)with the 2.8ltr 4 cylender, and after a year with this headache I finaly suspect the Passlock system is the culprate because the truck starts fine after exactly 10 minutes. ...
GMC Canyon, computer shot.. cost? I've been told my computer is gone in my GMC Canyon. It started shutting itself off randomly, I thought it was the passlock but I'm being told it's the computer, how ...
...GMC Canyon won't start sometimes, I wait about 10 minutes and it starts. I think its the passlock system. How do I fix this problem? Go to this sight for info and a permanent solution ...
passlock in my truck? Anytime I try to start my truck, it will lock up and the lock will flash on the dashboard. It will not start. Wait 10 minutes and it will start...sometimes. Sounds to me like the
Question about 2005 Canyon Extended
start relay ? Your check engine light an passlock light are lit because there is a problem an you need to take it an have it checked out ! Unless you have a factory or equivalent scan tool ! There are
Question about 2004 Canyon
passlock bypass system work if my sterring column will not lock The steering wheel lock is simply a physical lock that engages and disengages when you remove the key and turn the wheel. It has nothing
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions