Questions & Answers for: gmc canyon fan

...GMC Canyon 2.8L 4 cyl w/5speed. the 3 lowest settings on AC/Heater blower motor does not work. It only works on the highest setting. The Canyon has an inherint problem with the Fan Power cable being ...

...gmc canyon fan moter for ac dont work fan moter for ac dont work There is a fuse I would check first if you haven't tried that yet. They had problems with the switches in some of those vehicles. If ...

...GMC Canyon. No it's not a resister issue because I already went to the GM dealer to get the replacement resister, Installed it and it still only works on 4. Try bending the prongs on the connection ...

fan control only works on speed 4 fan control only works on speed 4 The fan may have to be replaced. Do check the back of your control switch to make sure all vacuum hoses are connected.

no heat. no fan. fuse keeps burning. 2007 canyon I would guess that your blower motor is toast.

...gmc canyon heater fan only works on the high position? There is a plug up under the glove box that loosens and you need to snug it up. The resistor block that control the lower fan speeds is bad. the ...

...Canyon's climate control knob which adjusts the temperature between hot and cold is not working properly. I have to slam on my brakes for cold air or gun it for hot while I turn on the fan. ...

...gmc canyon gets a little hot when at stop goes away when moving Replaced thermostat, checked water pump, replaced radiator, flushed fluid. Also replaced clutch fan. issue is that it keeps triggering ...

...GMC Canyon 2008 Blower fan only works on 2? Blower fan only works on 2? I had a problem on my 2006 sierra, the fan wouldn't work on 5. gm had a curtisy recall, they had to replace a resistor, at no ...

Fan speeds 1 and 3 do not work and the plug to the fan is burnt like it has been hot. Is this part of a service bulletin? I know of three other canyons/colorados with the same problem. These are all ...