...GM hubs it actually wasn;t the hub at all but a broken wire in the spped sensor harness about 8" back into the harness fixed the wire problem fixed. It sounds more like it's the wheel speed sensor ...
...them what you want, hopefully they have a late GM wreck with just what you need. They cut the harness. You have to splice, solder, and reconnect. Be sure to insulate wiring as needed. Hope this ...
...harness unplg it then go back to the coolant temp senser airflow meter throttle position senser and look for the 12 and the 5 volts again. If their back to good you know the problem is under the ...
...Harness in the Column. GM's Passlock System wires exit the Ignition Switch Tumbler together and then join with the Main Ignition Switch Harness. (See http://www.bulldogsecurity.com/ or ...
GM's gas tanks were notorious for going bad in this err, when you changed it did you use a quality part? Also the fuel pump sending unit plug/wire harnesses were known issues, so much that replacement
Usually answered in minutes!
1,478 Questions
1,272 Questions
1,097 Questions
1,065 Questions
830 Questions