Questions & Answers for: Ricoh glue plastic

...plastic breaks off and the duplexor entrance plate does not actuate properly, thus causing the problem you're having. you do not need the part number of that part because the part is working ...

ABS plastic and the glue is pretty strong. Without a pix of the broken part I can;t tell if it MIGHT be repairable. The glue is black color. If you can build up a fillet with a couple coats that helps

...plastic 'scoopers' inside of the toner hopper are damaged. You will need to disassemble the receptacle the toner bottle fits into and repair the 'scoopers'. If they are still there, just glue them ...

...like assembly in the front of the dispenser has some clear plastic tabs that dispense toner. They often times fall off. You can pop that tumbler off and glue them back into place. Very common

glue??? Sounds like the back of the lens may be sticking too far into the mirror box and interfering with the mirror travel. There are also a couple of bumpers on the bottom of the mirror box, and the

...plastic assembly behind the fuser? That is what you are looking for. The thermostat is blown. Put some super glue on your finger. Then touch the thermostat and tug. That black mesh pulling back out ...

...glue or a scrap of plastic is on a contact, making it impossible for the printer to read the status. check toner hopper some times old cap gets caught and doesn't go into old bottle. Remove toner ...