Questions & Answers for: Dodge Grand Caravan glove box removal

...glove box and left of the blower motor. disconnect the wires first then remove the 2 screws to pull out the resistor unit. First make sure you have removed the negative of your batterie. I had the ...

is the blower motor resistor located behind the dash glove box. Take the glove box out to access and change. It is mounted on/into the fire wall. Very easy to access, remove and install a new resistor

...glove box on the dash. Remove the whole glove box to access. The Resistor is mounted against/sort of into the fire wall. 1. Disconnect the negative side of battery. 2. Disconnected the Electrical ...

...glove box on my dodge caravan 2001 open the glove box door, remove everything from inside the glove box. remove the clip retaining the door-stop strap. pivot the glove box downward,unsnap the hinges ...

...Glove Box. The Resistor is located directly behind the Glove Box on the fire wall, and is held on with two (2) (I believe) 8mm screws. Unplug the Resistor, remove the screws and it pulls-out. Install ...

...Glove Box. The Resistor is located directly behind the Glove Box on the fire wall, and is held on with two (2) 8mm screws. Unplug the Resistor, remove the screws and it pulls-out. Install the new ...

...glove box and remove the glove box panel Remove the air conditioning switch connector and heater control leber knobs. Pull heater control unit cover from the instrument panel. Remove the gear shift ...

heat resistor in 2000 dodge caravan the blower motor resistor should be right behind the glove box. Remove the glove box, unplug the connector(s) and remove the two screws (9/32" socket usually works)

...glove box in a 2001 dodge caravan What you need to do is lower the glove box, push in on the sides of glove box, flexable area the holds the lid from falling open to the floor. let it swing down, and ...

...glove box then heater quit working Remove your glove box , behind it is a large resistor that allows the heater to have a low /med / high output...that resistor is a common problem. It blows!! Get a ...