Questions & Answers for: Mitsubishi generator locked rotor

Im trying to install a new rear hub assembly and cannot get the rotor off. Any sugestions. Remove the rotors. Rusted rotors will most likely stick to the car due to the iron oxidizing and bonding to ...

changing front brakes on 2004 mitsubishi endeavor Do I need to take off the front cv axle nuts in order to take off the front rotors. if you have floating rotors in the front then no. But if you have ...

We have a early 2004 Dodge 3500 with automatic transmission 4Wd diesel. Three times in the last few weeks I put on the brake while going uner 30mph and the truck started to vibrate real bad. It felt ...

Can't get rear rotors off... I can't get the rear rotors off my 2004 Mitsubishi Endeavor. there should be two holes in the rotors that will be threaded. send two bolts in them a little at a time to ...

front brake rotor removal need to know how to remove front brake rotor Your rotors have an integrated hub with serviceable bearing. Remove the six bolts around the center of the hub and pry off the ...

warping front brake rotors I have owned this 1997 mitsubishi montero for 11 years and the front brake rotors have always warped after awhile. No other car I've owned has had this problem. I suspect ...

...about it. Where is the adjuster for P.S. belt in a 2000 Mitsubishi Mirage DE coupe 1.5L engine???? GENERATOR DRIVE BELT TENSION ADJUSTMENT/ PS Loosen the nut of the generator pivot bolt. Loosen the ...

HOW TO CHANGE REAR ROTORS ON A 2004 MITTSUBISHI ENDEAVOR NEED TO KNOW HOW TO DO THIS Take the wheel off. Remove the two 14mm bolts holding the caliper bracket on. They are the two farther inboard, ...

how to replace front discs and pads Front brakes are very simple to do: Pull off the front tires.Remove the brake pads by removing the slide pin bolts where the piston assembly attaches to the caliper

I have a 1989 mitsubishi eclipse USA import can't get spark to the spark plugs replaced coil which is in distributor and replaced the distributor still no spark can anyone help ? I'm sorry to hear ...