Questions & Answers for: Briggs & Stratton generator brushes

Ad

Question about 11HP 6200W Es Generator

2 Answers

...generator. I keep having to replace the brushes. The "furthest in" brush (black wire) is always broken and it appears that the casing for the brush melts. What could be the problem? Sometimes it will ...

Ad

...Generator 5550Watt model 030253 That is showing an output of only 4.6 Volts at the pannel. Suggestions??? Check to see if this unit has brushes and rings. If it does, then make sure that the brushes ...

Ad

Question about Power Products 5,550 Watt Portable Generator #30241

1 Answer

...the reset button, but nada, just wondering any ideas what it might be... thanks Off the Grid in Maine It possibly could be the Brushes in the generator just wore out and need to be ...

Question about Power Products 5,550 Watt Portable Generator #30241

1 Answer

generator was running and quit generating power but the motor is running good brushs might need to be polarized-hook jumper cables to a 12v battery and touch to the brush contacts it should work and ...

Question about 6200 Watt Electric Start Generator 30242

1 Answer

...likely lies somewhere else. I have several hundred hours on OEM factory brushes on most of my generators, and no problems. Some sets have brushes that have outlasted the engine. Something else ...

Question about 12 Kw Automatic Standby Generator System 40233

1 Answer

no ac power from generator Service guy came over and said that my generator needed new capacitors becuase it wasn't getting 240 volts. He said that he would install for $400. I bought the capacitors ...

Question about 12 Kw Automatic Standby Generator System 40233

1 Answer

I have a generator that does not produce any volts. I replaced the brush block because it was bad with no help. I took resistance readings of the rotor and stator. Are these in spec?? briggs and ...

Question about Power Products 5,550 Watt Portable Generator #30241

1 Answer

getting 3.6 vols from 110 outlet 6.9 from 220 v outlet changed cap at brush assembly not sure if correct size. no voltage going in or out brush wires. Either the AVR is bad or the field needs to be ...

Question about Briggs and Stratton 030434 3250 Watt Portable Gasoline Generator

3 Answers

...generator anf replace the engine? aramature must be removed to get to the mounting plate it will slide out off case loosen long bolt in center of armature hold armature and hit bolt briskley will pop ...

Question about Briggs and Stratton 30340 6500 Watt Vox Industrial Generator

1 Answer

to remove engine from generator Remove cover to the generator and remove the brush holder (if brush type) and any other parts bolted to rear. Remove wiring harness plug (most generators have an easy ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Briggs & Stratton Electrical Supply Experts

John Trevino

Level 3 Expert

1407 Answers

Sheldon Dedek

Level 3 Expert

909 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Are you a Briggs & Stratton Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...