Questions & Answers for: general electric fix red button

Question about GE SmartWater Household Water Filtration System - GNWH38F

I was changing my filter in the ge filtration

red button. Then it says to unscrew the filter take the old one out and clean the filtrstion system then put the new filter in and put the filter system back together then turn the water back on. When

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

I was changing my filter in the ge filtration

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

The red pressure relief button on my GE Smartwater

...red pressure relief button on my GE Smartwater GXWH35F whole house water filter system doesn't seem to be relieving pressure. As a result I cannot turn the filter cartridge in order to replace the ...

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

GE Heavy Duty Household Filtration System

red button remove air etc. What now I can't think of anything else to do. Any suggestions? Thanks!! It sounds like there is quite a bit of sediment in the water. The filter you are using may be a very

Question about Sediment Water Filter Heavy Duty

1 Answer

I need instructions for replacing the filter on

...filter. Only tighten housing by hand. It helps to press the RED relief button again after you turn the water back on to bleed off any air in filter housing before you turn the outlet back on. ...

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

Ge smartwater wholehouse waterfilter main housing

... Replace it with a Pentair filter housing, 10" housing, 20" housing or Big Blue housing and make sure it is plumbed in properly. It is very unusual for a filter housing to fail unless it freezes up. ...

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

I HAVE A GE GXWH20S

RED BOTTON OPPOSITE THE SHUT OFF ARM THAT APPEARS TO BE A PRESSURE RELEIF VALVE OF SOME SORT. AFTER CHANGING FILTERS, THIS BUTTON HAS DEVELOPED A SMALL DRIP. WHY? That is what is called a purge valve.

Question about GE SmartWater Household Water Filtration System - GNWH38F

1 Answer

I just replaced my thermal

electric cord to a 4 prong, because of the hookups at my new house. My dryer makes a faint buzzing noise when I push the start button, but it doesn't start....I'm at a loss! Make sure you have

Question about Sediment Water Filter

1 Answer

How do you change a culligan water softener

red button" on top of filter housing and hold to relieve the pressure off housing.3. Unscrew housing to the left (lefty loosey, Righty tighty) You should have a housing wrench. 4. Remove filter, clean

Question about GE SmartWater Household Water Filtration System - GNWH38F

4 Answers

The red pressure relief button on my GE Smartwater whole house water filter system is leaking what do i do to stop this

fix a damaged o-ring and may not displace debris. I tried pressing the red button several times to no avail. I could see debris in the hole from the underside so I took my "air pig" and blasted in the