Questions & Answers for: Nissan 300ZX gear problems

Question about 1990 300ZX

3 Answers

...automatic transmission. Is it a twin turbo or a non-turbo model? It sounds like you've lost fourth gear and are stuck in 3rd - those RPM would be about right. If you can provide more information, it ...

Ad

mercedes a class gear box problem i have a merc a class 140 with auto gear box that is not changing gears can only do about 30 mph it seems to have gone to limp mode if there is 'F' apearing on d ...

Ad

Question about 1990 300ZX

1 Answer

...gear synchros were a known weak spot on the Z32 cars, but other gears could also develop trouble. MT90 is known to alleviate a lot of shifting problems related to synchros in the Z, so it's worth a ...

300Zx will not shift out of 5th gear I own a 1987 Nissan 300Zx with a 5 speed. I was on a trip and the transmission would not go into reverse. Then later on while driving home the trans stuck in 5th ...

300Zx will not shift out of 5th gear I own a 1987 Nissan 300Zx with a 5 speed. I was on a trip and the transmission would not go into reverse. Then later on while driving home the trans stuck in 5th ...

gear to drive? I have had multiple problems with the transmissioin after it's replacement, new clutch, etc...found that the line to the clutch had collapsed and replaced it with a high preformance one

...band for reverse and second gear. Any second gear problems? Possibly shifting directly from first to third? Drop transmission pan and check for bits of clutch band (non- metallic debris) to

i have a 1995 nissan 300zx twin turbo. lately it has been extremely hard to go into first gear. and sometimes it grinds even when the clutch is all the way in. and it usually grinds when going into ...

Question about 1995 300ZX

1 Answer

My 1987 Nissan 300ZX does not shift into reverse. All other gears work fine. I was told I would have to remove the transmission to fix the problem. Tell me if that is the correct solution to fixing ...

Question about 1990 300ZX

1 Answer

1990 300zx starter freespinning None Could be a damaged spot on the flywheel or a problem with the bendix gear on the starter.  The bendix gear engages with the teeth on the flywheel.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Manuals & User Guides

Loading...