Questions & Answers for: Minn Kota gear problems

Not getting into the gear I have a problem with the rear gears. They worked fine for the first six months and then I ended up with trouble for the rear gears. They seem to go really slow and the rear ...

m y minn kota trolling motor cover busted my minn kota trolling motor cover busted and i have to replace top and bottm. im not sure how the gears go back into it for the steering locator. paul HOPE ...

no thrust and grinding noise in head possibly a bad bearing or stripped gear.

stuck in gear forward will not shift into any other gear 80 pound stern mount 24 volt Riptide. When I hook it to the batteries it starts moving forward even though it is in the off position and does ...

...indicator arrow does not move in direction of motor . what could be wrong. you could have a broken gear inside the top of the motor. take the cover apart and you will see 3 plastic gears. one on the ...

...motor so when the pedal is flush or level the boat is pointing staight? you have to pull the black gear with the 2 cables on it up off the steel slpine gear, point motor straight, level pedal and ...

...is making a grinding noise when in operation.. I had this problem with my MinnKota Endura 35. The gear teeth that turn the prop are off center and need to be realigned. You need to take it to a ...

...pin, retaining nuts, spins freely, cannot remove nut to replace shear pin, any suggestions Use a gear puller. U should be able to put a small flat head screw driver in the middle of but to hold ...

gear puller bare with me here i need to know if there is a specfic kind of gear puller i need and where would be a good place to find one ...

My co pilot minn Kota is hung in left gear. Had to doc one to from the battery to get it to stop. How do I fix try here .. https://www.minnkotamotors.com/support/service-providers/locate