...washer is level and we can't find a hose loose GE washers have problems w/ pressure switch malfunction CHECK THE DRAIN THAT IT NOT PARTLY CLOGGED IF SO THE WATER WILL FIND IS WAY OUT WHEN IN SPIN ...
GE 1996 top loader agitation but good spin cycle What is the potential issue with the problem stated above. Water fills, agitator does nothing. Tub spins for "spin" cycle just fine. check the motor, ...
GE Washer top-load WLDSR416FOWC Late model washer will not spin on wash cycle but will spin on rinse cycle. Timer appears to be ok. Actually, I think I do remember having one do this before, and I ...
...ge washer If you over load or the washer did not drain fast enough or over suds ing , when the washer starts to spin the forse of the spin will push water up the pressure switch hose causing the ...
Question about WBSR3140DW Top Load Washer
GE Washer agitates when I try to fill it up with water,wont fill When i try to start my washer ,it just agitates it dosen't fill with water. The timing seems to be off. I put baking soda and vinegar ...
Question about WBSR3140DW Top Load Washer
water level switch and hose. But now the wife says. The washer fills the first time then drains and spins then on the rinse cycle it drains but will not spin leaving all of her clothes soaking wet. It
Question about WBSE2090A Top Load Washer
...GE model whse 6240doww The water-level switch regulates your washer's fill volume. This switch is usually a diaphragm device with a small, clear tube attached between the switch and the bottom of the ...
...GE TOPLOAD WASHER WAS TOLD IT WAS TIMER SWITCH REPLACED IT,NOT THE PROBLEM.HAVE IT SET ON SMALL LOAD WATER FILLS PAST LIMIT AND JUST KEEPS RUNNING? Your water level switch is stuck. Probably due to ...
Question about WBSE2090A Top Load Washer
...water in it. I filled the washer and did a load. It pumped out the water but I had to refill for rinse cycle. It also spinned just fine. I checked the lines for kinks, cleaned out the filters and ...
Question about WBSE2090A Top Load Washer
washer may add water unnecessarily. Check the pressure switch and associated components for issues. Drain Hose Placement: Ensure that the drain hose is properly positioned. If it's too low or if there
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions