Questions & Answers for: gate light jeep liberty

...gate of the jeep. There chould be 2 screws that hold in the light assembly. Remove the screws and pull out the assembly. Replace the bulbs and replave the housing. I have changed the bulb and tail ...

...light REPLACING THE BULB IS EASY. OPEN THE LIFT GATE, LOOK TO THE SIDE THAT YOU ARE REPLACING. RIGHT BESIDE THE TAIL LIGHT THE ARE TWO SCREWS. REMOVE THEM AND TAIL LIGHT SHOULD JUST PULL OUT. MAKE ...

gate light on even when gate is closed gate is closed, gate window will not open, car interior lights then stay on Open gate and find where the wiring enters the gate (bottom of door) pull back the ...

gate light on my Jeep liberty is on, gate is closed and locked The gate light on my 2002 Liberty was on for a long time and I researched on this site about it but ended up just hitting the trip meter ...

gate light is on in the dashboard and rear gate wont open with remote or push button on rear door my rear window gate wont open with remote or with the push button on rear door someone know what going

...gate on dash and interior light will not turn off got new battery and still doing it error code gate on dash even when car is turned off. Interior dash lights go dim when i turn outside lights on. ...

Gate light on dash will not go off also dome light stays on rear lift door is not jarred Lifted up the rear door and checked and re shut. Pushed in on odometer button. Replace the gate latch. Open the

Gate message is on dashboard. Gate is closed interior lights won't go off. What can I do? Check the wires first. At the top of the gate, there is a rubber boot. Wires break here first. after that, ...

Car was outside. Still have the engine light on when I start the car. scan it. the CEL lamp on running means. "SCAN ME.," now. the gate warning means just that, gate in ALarm. and needs to be repaired

...gate door ajar light is controlled by the lift gate module or BCM . These modules have their own power supply . Now what problem are you having ? no ajar light showing on the instrument cluster when ...