Questions & Answers for: FrancisFrancis! gasket

where do i get gaskets for FrancisFrancis X1? can you telll me where i can get gaskets for FrancisFrancis X1? The Francis Francis machines are owned by illy now - you can get parts from them - ...

...Is there any way to repair this OR is there an alternative diagnosis? It is possible that the gasket under the spring is damaged, remove the screen and diffuser and check the spring and gaskek ...

Francis Francis X1 Gasket broken my machine is spilling water from the head - where do i get a new gasket in the US? Hello Salmonp, You can contact Empire Fulfillment at 877-855-4540 for all of your ...

I need a gasket for my FrancisFrancis x5 Get a tube of Permatex Gasket-maker. I used the high temperature RTV Silicone and was available at Ace Hardware.

...connects to the machine. Tightening the 4 nuts did not help. HI More than likley its your brew head gasket that is leaking. Take off the 4 nuts you hust tighten and it exposes the brew head gasket. ...

on Ristretto, the coffee comes out way too fast and the portafilter leaks. You need a new brew head gasket. They are not that hard to change. Four nuts hold the chrome head on. Once the chrome head is

...to a screw. Turn this screw with a flat bladed screwdriver and the knob will come off. There is a gasket (washer) near the end of this know which is the seal. I don't know where you get the seal, ...

how can i get parts for a francis francis x1 What parts? The gasket is a standard gasket and you can probably get it on ebay. One of the things I like about the Francis Francis is that you can take it

...a Francis Francis x3 that continually drips water into the coffee handle while it heats. Is this a gasket, fitting, or a thermostatic boiler problem? Most likely a gasket problem. But you say that

My machine is spilling water from the head - where do i get a new gasket in the Europe/Norway? Looks like aluminium not brass if there is a difference between gasket (O-ring) for these to alternatives