Question about Color LaserJet 3500 Printer
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
fuser not getting hot, then suspect burned out fuser heater (look inside fuser roller for a long light bulb). I had the same problem with a CLP500 and bought a secondhand CLP510N and replaced the unit
Question about LaserJet 2840 All-In-One Printer
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
Question about Color LaserJet 2600n Printer
Fuser is hot. What is a fuser? My hp laser jet 3500 is showing an error message in the dispaly window. It says "50.1 Fuser Error. Fuser is hot. Press both sides of fuser to ensure it is fully seated."
...fuser is hot (10-15 min. or so, print is smeared, has lines through it, and sometimes there is only the suggestion of an image. You can get a good image before the fuser heats up, but density is ...
...Hot fuser service check? on page 2-91. Error Code 923.xx, 924.xx, and 925.xx may display for a hot fuser failure. CAUTION: .The fuser may be hot, use caution before removing or servicing. CAUTION: ...
...power module. If the bulb/element blew, or the AC power module is stuck on or off, the temperature won't get hot enough, or will get too hot. Either too hot or not hot enough will cause a fuser
...a defective fuser. In the grand scheme of things, the fuser gets hot and fuses (melts) the toner onto the paper. Your fuser probably isn't getting hot enough to fuse the toner. Get the fuser
...error FUSER TEMP could you please help me to solve? It indicates that the fuser is either not hot enough or too hot. In most cases this is caused by a failed fuser that will require
...fuser hot. when installing the old but broken one, there's no problem. i have orderd a second fuser, and it give's the same error. i checked the connectors, it seems oke. the fuser does not ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions