Questions & Answers for: fuser door xerox machine

Question about WorkCentre XD100 All-In-One Laser Printer

4 Answers

...door. You'll see fuser unit secured inside right door with 2 screws. Follow the wires out of the fuser to the place in the back where the connector is located. Press little latch on connector, and ...

Ad

Question about Phaser 7750DN Laser Printer

1 Answer

...you jarred the fuser. Turn the machine off and reseat the fuser. Open the left side door, there will be 2 thumb screws. Remove and reseat the fuser, if that doesnt work you have to replace the

Ad

Question about Phaser 7750DN Laser Printer

1 Answer

door, there are 2 silver phillips screw that hold the fuser in. remove those, then unplug the 2 connectors that supply the power and the thermistor control. Once you do that, install the new fuser and

Question about WorkCentre M20i All-In-One Laser Printer

2 Answers

...would need a new fuser unit. The fuser is located behind the door on right side of the machine. There are four screws used to hold the fuser in place. Good Luck, I hope this helps. m15i open heat ...

Question about WorkCentre M20i All-In-One Laser Printer

3 Answers

...door and gently feel the fuser frame to see if it is warm at all. Do not touch the Fuser roll; it is hot even to the slightest touch. If it is not hot, make sure all the plugs were correctly plugged ...

Question about FAXCENTRE 2218 18PPM FAX

1 Answer

...fuser bushing. Leave the machine off overnight to cool. Open the right side door. You will see an assembly with a yellow sticker on it, it is a caution HOT warning. That is the fuser. There are 4 ...

Question about WorkCentre M20i All-In-One Laser Printer

1 Answer

...needed. Close the door, pug machine, and turn it on. If the fuser fan is not working, this can cause the fuser to over heat again. Make sure the fan is truning by viewing it from the back. Good

Question about WorkCenter 4150 Black and White Copier

2 Answers

...door and remove the 4 screws that hold in the fuser. Make sure the machine has been off for awhile because the fuser my be hot. Here is a video that shows you how. Hope it helps, and thanks for using ...

Question about Phaser 3300mfpv/x Print Copy Scan Fax All-In-One Laser Printer

1 Answer

...fuser door on a xerox fax machine 3300 mfp Error message on the xerox phaser 3300mfpv/x fax machine says the fuser door is open. Where is the fuser door? The fuser door is at the back of the machine. ...

Question about Phaser 3300mfpv/x Print Copy Scan Fax All-In-One Laser Printer

1 Answer

...and That the Door is Closed Securely Reseat Fuser Drawer (Transport / Duplex Drawer) Power OFF / Power ON the Machine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...