Questions & Answers for: LG fuse washing machine

Question about WM-1485FHD Front Load Washer

2 Answers

...! So. I cut out the jelly to reveal the fuse and soldered a piggy back fuse onto the blown fuse. Job done. Washing machine fixed. Total cost £0.00 (Plumber callout would have been £80. New board

Ad

Question about WM-1832C Front Load Washer

2 Answers

washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? Lid switch If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside

Ad

Question about WM-1832C Front Load Washer

2 Answers

...parts here, just click and insert model number Following weblink might help you to get Fuse for machine. ...

Question about WFT1071TP Top Load Washer

3 Answers

...washing machine will not turn on. No lights on the control panel. HELP Well I found the problem - fuse had blown. There is a circuit diagram on the back of the washer that allowed me to locate the ...

Question about WD-14124RD Front Load Washer / Dryer

1 Answer

...through wash tripped fuse in fuse box, now if plugged in trips fuse without even turning machine on. You have a dead short either in your breaker box or the plug in. Chances are it is your

Question about WD-14124RD Front Load Washer / Dryer

1 Answer

...washing machine. Is it plugged in? Has a fuse blown or is a circuit breaker tripped? If the lid switch is defective, your washer can't spin and may not function at all. The switch is inside the ...

My washing machine keeps tripping the fuse box every time after I use it. Each time I want to wash a load of clothing I have to trip the fuse You have a bad circut breaker.

Question about WM2277H Front Load Washer

1 Answer

house fuse blew and now there is no power on LG WM2277H washing machine Did you replace / reset fuse? Turn on washer again if it blows unplug it, unit has a dead short inside.

Question about WM-2277HW Front Load Washer

1 Answer

...fuse box--old name). If it has not triped a breaker. Unplug your washing machine and wait about 10 or 15 second and replug the washing machine into the electrical socket. Don't turn it on. There ...

why does lg top load washing machine (WT5001CW) keep blowing control board fuse? replaced control board and fuse blew again after 5 washes How old? Motor brushes worn or motor commutator fault maybe?

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top LG Washing Machine Experts

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...