Questions & Answers for: fuse pops turn ignition switch

...turn it off. There is no resistance when turning the key to the off position and the steering wheel won't lock. To stop the engine I need to pop the hood and pull the ignition fuse then remove the ...

...turn it off. There is no resistance when turning the key to the off position and the steering wheel won't lock. To stop the engine I need to pop the hood and pull the ignition fuse then remove the ...

...fuse pops. If it does unplug whatever added accessories you may have still have plugged in. Once you can get the fuse to stop popping, turn the ignition switch to on. Then one at a time plug you ...

...fuse box.I'd start with the battery cables and look for those fuseable link wires. I had the same thing on my 2002 Crown Vic: "turned ignition switch to start - heard pop - no electrical power" - ...

...fuse keeps popping every time i turn the ignition on, it turned out the side stand switch was at fault, that was by passed and it started fine, now i've got a 1997 600 bandit, the 10 amp ...

...fuse an the tester bulb will light up.Turn switch off and light goes out.Under the panel cap will tell you what the fuse goes to.Best to use one that isn't part of ignition circute cause you may be ...

...from the switch and inspect the plug for a short. Replace the fuse and turn the ignition on with the switch unplugged. If the fuse still pops there is a ground fault somewhere else in the

...fuse (#8)pops every time i flip the run switch to "run". Sounds like something is grounding out/earthing. Look in a manual for the wiring diagram and check all the wires going through #8 fuse to see ...

...Fuse pops, bad wire from the ignition switch to the fuse/relay panel. If it doesn't, swap relays in the panel. Turn it on, if the fuse pops, bad wire to the ECM or the ECM has shorted internally. If ...

...turn the key, there are several potential issues you can check: Fuse: Check the fuse box for any blown fuses. A sudden pop sound could indicate a blown fuse, which would interrupt the electrical ...