Questions & Answers for: Mazda MPV fuel sensor

...sensor.Fuel filter has not been changed they say it is part of fuel pump? Is the pump in the tank? Any help would nice Thanks the fuel pump is in the tank. i dont think the fuel filter is part the ...

...HO2S is mounted HO2S is contaminated, deteriorated or it has failed Fuel control sensor is out of calibration (i.e., ECT, IAT or MAP) Base engine -mechanical- fault affecting one or more ...

...fuel level sensor witch will be the easiest you will need to take the fuel pump assembly out and to do so you have to remove the no. 2 rear seat and pull back the floor mat . un bolt the service hole ...

is the fuel level sensor the same as the map sensor? no they are not the same map sensor is manifold air pressure and fuel level sensor is the tank level sensor

...cold start injector), engine coolant temp sensor or intake air temp sensor is stuck at full hot (doesn't allow enough fuel for cold starts), fuel injectors are leaking (floods engine with

...sensor 1 fuel system is too rich fuel pressure too high fuel pressure regulator leaking or more than 1 fuel injector leaking. fuel contaminated.check spark plugs if black carbon color fuel system too ...

sensor bank one and two. Running lean means the ur car is not getting enough fuel for complete combustion. Your O2 sensors have picked this up from the readings. Be sure to check what could be causing

...can not make the injectors give enough fuel to make it rich. The problem could be the O2 sensor, or it really could be a fuel problem. Bank two is the side with cylinder number 2 on a V6

sensor connector. The van gets fuel and spark and still won't start. Are you checking for fuel at the fuel rail or are the spark plugs getting wet with fuel? If all cylinders are sparking and there is

...fuel pump works and send gas, but no start, no spark too, should be the crankshaft position sensor? or the camshaft position sensor? i have no check engine light on. Spark is controlled by the ...